Views:321 Author:Site Editor Publish Time: 2021-09-17 Origin:Site
The Packing machine is currently a domestic type of automatic continuous shrink packaging equipment. Because the Packing machine has various advanced packaging production technologies, it has strong packaging capabilities and a wide range of applications. The Packing machine is designed to eliminate deviations in the packaging process. For the error of the sealing and cutting parts, the main consideration is the automatic positioning of the Packing machine. Therefore, the new type of Packing machine can avoid the various problems of the traditional packaging equipment, and the packaging effect is better, so that modern enterprise can use it with confidence. Sometimes there will be related Packing machine failures, so how to solve Packing machine failures? Let's take a look together next.
This is the content list:
When the temperature is too high, the speed is too slow, and the outer layer of the coating has poor heat resistance
When the knife holder is too high or too low, the packaging speed is too fast, and the push rod is not synchronized with the cutter
The color of the film color mark is too light, the film drive is slipping, and the color mark tracking is not turned on
When the solid-state circuit breaker burns out, the temperature control meter is damaged, or the thermocouple is damaged
If the speed is too fast, the heat sealability of the inner layer of the film is poor, and the temperature is too low
When the air pressure is wrong, the swing rod of the cylinder is loose, the heating temperature is low, and the heating roller and the driving roller are not parallel
When the Packing machine temperature is too high, the speed is too slow, and the outer layer of the film has poor heat resistance, the Packing machine seal will show signs of scorching. The repair method is to increase the Packing machine speed, lower the temperature, and replace the film material.
The Packing machine knife holder is too high or too low, and the packing speed is too fast. When the pushrod is not synchronized with the cutter, the Packing machine cutter will cut on the product. The repair method is to reduce the packing speed of the Packing machine and adjust the end seal parts of the Packing machine. High and low, so that the center of the sealing knife is in the middle of the height of the product.
The color of the Packing machine film color mark is too light, the film drive is slippery, and the color mark tracking is not turned on, the cutting position will deviate from the color mark. At this time, the repair method is to refer to the Packing machine manual and adjust the sensitivity of the Packing machine. In the man-machine dialogue interface, switch the tracking mode to "tracking cut".
The Packing machine solid-state circuit breaker burns out, the temperature control meter is damaged, and the temperature meter cannot control the temperature when the thermocouple is damaged. The repair method is to replace the Packing machine power couple, replace the temperature control meter, and replace the heating element.
The Packing machine speed is too fast, the inner layer of the film has poor heat-sealability. When the temperature is too low, the seal will leak or become weak. The repair method is to slow down the Packing machine, increase the temperature, and replace the film material.
The Packing machine air pressure is wrong, the cylinder swing rod is loose, the heating temperature is low, and the heat pressure roller and the transmission roller are not parallel, the heat sealing will be poor. The repair method is to adjust the Packing machine parallelism, adjust the temperature and air pressure to tighten it.
And it should be noted that before the Packing machine is powered on, the induction aviation plug must be inserted and the screws must be tightened. The Packing machine cannot use a metal cover and metal container, let alone press the start button on the metal table, otherwise, it will damage the Packing machine. During the working process of the Packing machine, you should touch the surface of the induction head frequently to check whether the Packing machine is overheated. If you find that your hand is hot, stop heating and wait for it to cool down. There will be high voltage in the Packing machine, and the bottom plate has electricity. To avoid personal danger.
Aman Machinery Co., Ltd. was established in 2007 and is an authorized supplier of Unilever in Bangladesh. Aman Machinery takes "honesty as the foundation" as its foundation, insists on strict management and technological innovation, meticulous manufacturing, and continuous improvement. If you are interested in a Packing machine, we will provide you with the equipment, and we will tailor it for you according to your specific needs for the Packing machine. Welcome your visit and guidance. Please contact us, our website is www.amanmachinery.com.