+86-13656178855      anna@amanmachinery.com
You are here: Home » News » The adjustment method of Labeling Machine equipment under different situations

The adjustment method of Labeling Machine equipment under different situations

Views: 0     Author: Site Editor     Publish Time: 2023-06-30      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

In our daily life, Labeling Machine brings us great convenience. So what are the adjustment methods of Labeling Machines in different situations? Let's take a look at it next.


This is the content list:


  • Labeling Machine labels should be installed in place

  • Adjust the distance between the Labeling Machine labeling cylinder and the peeling cylinder platform

  • Adjusting the position of the Labeling Machine peeling cylinder platform and suction head

  • Adjusting the upper and lower cylinders of the Labeling Machine for over-labeling

  • Adjusting the suction strength of Labeling Machine


Labeling Machine label installation must be in place


Labeling Machine label installation must be in place, when winding the label as neatly as possible, crooked is also easier to break the label Labeling Machine label installation is completed with a limit ring to fix the position.

Adjust the distance between the Labeling Machine labeling cylinder and the peeling cylinder platform

Turn off the air supply, pull down the Labeling Machine labeling cylinder to the limit position, and observe the distance between the bottom surface of the suction head and the platform plane of the peeling cylinder. Adjust the position of the Labeling Machine labeling cylinder according to the bottom surface of the suction head is slightly lower than the platform plane. You can adjust the Labeling Machine up and down by loosening the fixing plate on the labeling cylinder and lock the fixing plate after adjustment.


Adjust the position of the Labeling Machine peeling cylinder platform and the suction head


Disconnect the air supply, pull out the peeling cylinder, and then pull down the suction head to observe whether the area where the suction head draws Labeling Machine labels is basically pressed on the peeling cylinder platform, and the suction area can only span the position covering one label. If the suction head does not press the majority of the label area on the platform, or if the label area is pressed against two labels, the Labeling Machine label peeling cylinder needs to be adjusted by adjusting the limit screws on the cylinder. If the range of the Labeling Machine is relatively small, it can also be adjusted simply by adjusting the front and rear position of the Labeling Machine suction head installation.


Adjusting the upper and lower cylinders of the Labeling Machine for over-labeling


Place the product to be labeled by the Labeling Machine on the fixture, turn off the air supply, pull down the labeling cylinder and the upper and lower labeling cylinder to the limit position, and observe whether the Labeling Machine suction head can press the labeling area on the surface of the product. If the labeling area on the surface of the product is not touched, adjust the fixing plate of the upper and lower cylinders of the Labeling Machine. This can be adjusted by loosening the screws and adjusting the Labeling Machine to complete the locking screw fixation. It can also be solved by raising the jig platform. However, for different Labeling Machine products, the degree of downward pressure of the suction head will also be different. For example, for a conventional flat surface Labeling Machine, the suction head only needs to touch the surface of the product (just touching the surface of the product). For some curved surface Labeling Machine labeling, the suction head downward pressure requires more pressure and tighter pressure to achieve the effect of complete labeling. Of course, for concave products, the corresponding suction head jig will be used for Labeling Machine labeling.


Adjust the suction force of the Labeling Machine


If the suction strength of the Labeling Machine is not strong enough, you can cover other small holes on the suction head to increase the suction strength of the suction area, and wrap the raw material around the edge of the suction head to avoid any air leakage.


Aman Machinery Co., Ltd. was established in 2007 and is the authorized supplier of Unilever in Bangladesh. We mainly produce and supply powder filling machines, vacuum packaging machines, automatic Labeling Machines, assembly machines, and bottle capping machines. Our company is committed to continuous research in this fastest-growing market to ensure that we and our customers remain at the forefront of the Powder Filling Machine, Vacuum Packaging Machine, Automatic Labeling Machine, Assembly Machine, and Bottle Capping Machine industry. The above is about the adjustment method of Labeling Machine equipment in different situations, if you are interested in Labeling Machine, you can contact us, our website is www.amanmachinery.com.

ABOUT US

We takes "faithful and honest" as our root, persisting in strict management and technology innovation for automatic labeling machines, capping machines and other products.

QUICK LINKS

CONTACT US

  Room 505, No.307 Guangnan Road Liangxi District, Wuxi, China
  +86-13656178855

SUBSCRIPTION

Subscribe for our newsletter to receive the latest news.
Copyright © 2021 Aman Machinery Co., Ltd.   Support by Leadong  Sitemap
Leave a Message
Send Us A Message