| Model | AM-82PC |
| Max. Product Volume | 25L |
| Dry Cycle | 360pc/h |
| Screw Diameter | 82mm |
| Screw L/D Ratio | 25L/D |
| Hy Motor | 3500cc/r |
| Screw Heating Capacity | 34KW |
| No. of Heat Zone | 4 |
| Plasticizing Capability | 70(PC)kg/h |
| Accumulator Volumes | 1.5L |
| Oil Pump Driver Power | 45KW |
| Clamping Force | 210KN |
| Mold Stroke | 330-780mm |
| Bottom Blowing Lifting Stroke | 150mm |
| Blowing Pin Lifting Stroke | 125mm |
| Max. Size of Mold | 500*600mm |
| Max. Die Diameter | 150mm |
| Die Heat Capacity | 8.7KW |
| Blowing Pressure | 0.8Mpa |
| Air Volume | 1m⊃3;/min |
| Cooling Water Pressure | 0.3Mpa |
| Water Consumption | 15L/min |
| Max. General Power | 91.7KW |
| Average Consumption | 45KW |