Home/Assembly Machines/Household, Stationery, Electrical & Automotive Parts Assembly Machines/Hanger Hook Inserting Machine
Household, Stationery, Electrical & Automotive Parts
Hanger Hook Inserting Machine
Hangers feed from the stack, take a metal hook and hang in rows.
This machine inserts a metal hook into each plastic clothes hanger.
Hangers are stacked in a vertical magazine, and a swing arm pushes them out one at a time to the hook station. Finished hangers are hung in rows on an outfeed rail. A typical machine runs about 30–40 hangers per minute.
Send drawings or photos of your hanger and your hook, and we'll tell you whether we can assemble them, and how fast.
Overview
Key Points
- Inserts a metal hook into each plastic hanger
- Hangers fed one at a time from a vertical stack magazine
- Finished hangers hung in rows on an outfeed rail
- About 30–40 hangers per minute (typical)
- Exact quote within 24–48 hours once we have your part details
- Warranty: 2 years on mechanical parts, 1 year on electrical parts, for faults not caused by misuse
Key Figures
Typical specifications
| Item | Value |
|---|---|
| Output | About 30–40 pcs/min (typical, depends on the hanger and the hook) |
| What it does | Inserts a metal hook into each plastic hanger |
| Hook wire | Set up for your own hook wire. Send a drawing or a sample hook. |
| Layout | Vertical stack magazine, swing-arm feed, outfeed rail |
| Power supply | 220 V, 50 Hz |
| Air supply | 0.5–0.6 MPa |
| Warranty | 2 years on mechanical parts, 1 year on electrical parts (faults not caused by misuse) |
Typical figures. Every machine is set up for your own hanger and hook.
What It Runs
Suitable Parts
Plastic clothes hangers with metal hooks.
Answers
Frequently Asked Questions
Drawings or photos of your hanger, your hook and the finished hanger, and your target output. With those, we'll send an exact quote within 24–48 hours.
It depends on your hanger, your hook and the output you need. Send us your drawing or photos and your target output, and we'll send an exact quote within 24–48 hours.
A typical machine inserts about 30–40 hooks per minute. Your machine is matched to your hanger, your hook and the output you need.
It is the assembly step of hanger making. The plastic hanger bodies are moulded first; this machine takes them from the stack and fits the metal hook, so no one has to push hooks in by hand. If you need the hanger mould as well, tell us when you send your drawing.
Each hanger hook inserting machine is made to your parts by a long-term partner factory. We choose the machine for your part, install and commission it on site, train your team and supply the spare and wear parts, so after-sales goes through one contact.
Get a Quote
Request a Quote for This Machine
Send us your part drawing or photos. We check which machine can assemble it, then send you a quote.
