Cap Assembly Machines for Caps, Closures & Lids
Loose cap parts in, finished caps out.
Cap assembly machines join the separate parts of a cap into one finished closure: two-piece and 3-piece caps, multi-piece wine and liquor caps, oil caps, mouthwash caps, baby bottle caps, perfume caps, 5-gallon caps, pressure valves and plugs. The same range covers food container lids with seal rings and lunch box lids. They assemble the cap or lid itself; they do not screw caps onto bottles. Every assembly machine is set up for the customer's own parts.
Send us your part drawing or photos. We check which machine can assemble it, then send you a quote.
What do you want to assemble?
Two- and Three-Piece Caps
Bottle Cap & Closure Assembly Machine
Assembles plastic closures from their separate parts.
- 30–40 pcs/min
Large and Special Caps
Wine & Liquor Cap Assembly Line
Assembles 4-part wine and spirits caps, about 5,000 an hour.
- About 5,000 pcs/hour (typical)
Perfume Cap Assembly Machine
Assembles perfume caps on a rotary table, about 20–30 a minute.
- About 20–30 pcs/min (typical)
Valves and Plugs
Cap, Plug & Silicone Valve Assembly Machine
Puts a cap, a plug and a silicone valve together.
- 80 pcs/min
Food Container and Lunch Box Lids
Lid Seal Ring Machine with Gantry Transfer
Fits the seal ring into each food container lid.
Lunch Box Lid Assembly Machine
Presses lids onto lunch boxes, or fits the vent cap.
Send your cap drawing or photos and we'll tell you which one fits.
Need liners in your caps as well? See Cap Lining Machines →
Typical specifications
| Machine | Typical output |
|---|---|
| Two-Piece Cap Assembly Machine | 4,000–5,000 per hour, depending on the cap |
| 3-Piece Cap Assembly Machine | 4,000–5,000 pcs/hour |
| Mouthwash Cap Assembly Machine | 30–40 pcs/min |
| Bottle Cap & Closure Assembly Machine | 30–40 pcs/min (standard model) |
| 5-Gallon Cap Assembly Machine | 5,000 per hour |
| Oil Cap Assembly Machine | 6,000–10,000 per hour |
| Baby Bottle Cap Assembly Machine | 30–40 pcs/min |
| Wine & Liquor Cap Assembly Line | About 5,000 pcs/hour (typical, 4-part caps, four caps at a time) |
| Perfume Cap Assembly Machine | About 20–30 pcs/min (typical, depends on the cap) |
| Cap, Plug & Silicone Valve Assembly Machine | 80 pcs/min |
| Pressure Valve Assembly Machine | 80 pcs/min |
| Bakelite Plug Assembly Machine | 80 pcs/min |
| Configuration | Set by your cap and output |
Figures are taken from each machine's own page. The food container lid seal ring machine and the lunch box lid assembly machine are set up around your lid; send drawings and we confirm the speed.
Machines We Have Supplied
Morocco · Household Detergents · In-Line Laundry Detergent Cap Assembly Machine
Two-piece laundry detergent caps, assembled in line with the injection moulding machine, with no manual handling in between.
Read the case study →
Indonesia · Beverage & Personal Care Packaging · Push-Pull Cap Assembly Machine
Two vibratory bowls feed the two parts of a push-pull cap to a rotary index plate, where they are pressed together.
Read the case study →
Egypt · Beverage Packaging · 3-Piece Cap Assembly Machine
Three-part caps for beverage cartons, assembled on a rotary table behind glass guards.
Read the case study →Each cap machine above was set up for that customer's own cap. If your cap is different, send us the drawing, and we'll tell you whether it can be assembled, and how fast.
How It Works
- 1
Send your part.
Upload a drawing or photos of each part and the assembled cap.
- 2
We find the machine that fits.
We look at your parts and tell you which machine can assemble them, and how fast.
- 3
Get your quote.
We send an exact quote within 24–48 hours once we have your part details.
- 4
Installation and training.
We install the machine at your site, commission it and train your team on site.
Frequently Asked Questions
How it is assembled: Flip-Top vs Disc Top vs Push-Pull Cap Assembly
Get an Exact Quote within 24–48 Hours
Send us your cap or lid drawing, or photos of each part. We check which machine can assemble it, then send you a quote.