Continuous Spray Trigger Sprayer Assembly Line
Sprayer heads move through the rotary stations while a press head pushes each one home.
This line assembles continuous spray trigger sprayers, the kind that keeps spraying a fine mist instead of giving one burst per pull.
Vibratory bowls and feed tracks bring the parts in. The sprayer heads stand in fixtures on rotary tables and move through the assembly stations, and a press station pushes each head down into place. Finished sprayers come off the line with their dip tubes fitted. A typical line runs about 40–50 sprayers per minute.
Send drawings or photos of your sprayer parts, and we'll tell you whether we can assemble them, and how fast.
Used for: Trigger sprayer assembly machines
Key Points
- Assembles continuous spray trigger sprayers
- Parts fed by vibratory bowls and feed tracks
- Rotary-table stations with a press-fit station
- Finished sprayers leave with the dip tube fitted
- About 40–50 sprayers per minute (typical)
- Exact quote within 24–48 hours once we have your part details
- Warranty: 2 years on mechanical parts, 1 year on electrical parts, for faults not caused by misuse
Typical specifications
| Item | Value |
|---|---|
| Output | About 40–50 pcs/min (typical, depends on the sprayer) |
| Product | Continuous spray trigger sprayers with dip tubes (line shown) |
| Layout | Vibratory bowl feeding, rotary-table assembly stations, press-fit station |
| Warranty | 2 years on mechanical parts, 1 year on electrical parts (faults not caused by misuse) |
Typical figures. Every line is set up for your own sprayer parts.
Suitable Parts
Continuous spray trigger sprayers with dip tubes.
Frequently Asked Questions
How it is assembled: How a Trigger Sprayer Is Assembled, Step by Step
Request a Quote for This Machine
Send us your part drawing or photos. We check which machine can assemble it, then send you a quote.
