Medical Device Assembly Machines
Medical PVC Tube End Closing Machine
A rotary table carries rows of blue tubes under hot-melt heads that press down.
This machine heat-fuses the tip of medical PVC tubing.
The standard model works six tubes per cycle on a rotary table and runs 35–45 pieces per minute; hot-melt heads press down to fuse the tip of each tube.
Send drawings or photos of your tube and tell us what the end should look like, and we'll tell you whether it fits, and how fast.
Used for: Catheter and medical tube machines
Overview
Key Points
- Heat-fuses the tip of medical PVC tubing
- 35–45 pieces per minute, six per cycle (standard model)
- Rotary table
- Set up for your own tube
- Exact quote within 24–48 hours once we have your part details
- Warranty: 2 years on mechanical parts, 1 year on electrical parts, for faults not caused by misuse
Key Figures
Typical specifications
| Item | Value |
|---|---|
| Output | 35–45 pcs/min (standard model) |
| Pieces at a time | Six |
| Layout | Rotary table |
| Machine size (L × W × H) | 2300 × 2000 × 1700 mm |
| Warranty | 2 years on mechanical parts, 1 year on electrical parts (faults not caused by misuse) |
Figures are for the standard model. Every machine is set up for your own tube and tip.
What It Runs
Suitable Parts
Medical PVC tubing.
Answers
Frequently Asked Questions
Drawings or photos of your tube and the tip you need, and your target output. With those, we'll send an exact quote within 24–48 hours.
It depends on your tube, the tip you need and the output you need. Send us your drawing or photos and your target output, and we'll send an exact quote within 24–48 hours.
The standard model runs 35–45 pieces per minute, six per cycle. Your machine is matched to your part and the output you need.
Each medical PVC tube end closing machine is made to your parts by a long-term partner factory. We choose the machine for your part, install and commission it on site, train your team and supply the spare and wear parts, so after-sales goes through one contact.
Get a Quote
Request a Quote for This Machine
Send us your part drawing or photos. We check which machine can assemble it, then send you a quote.
