Catheter & Medical Tube Tipping Machine
Thin blue tubes ride carriers through a row of tip-forming heads to an outfeed belt.
This machine forms the tips of medical tubes by heat.
The standard model carries the tubes on precision carriers, six per cycle, through a row of heated forming heads, and runs 60–80 pieces per minute; finished tubes go out on a belt.
Send drawings or photos of your tube and tell us what the end should look like, and we'll tell you whether it fits, and how fast.
Used for: Catheter and medical tube machines
Key Points
- Heat-forms the tips of medical tubes
- 60–80 per minute, six per cycle (standard model)
- Precision pallet conveyor
- Set up for your own tube
- Exact quote within 24–48 hours once we have your part details
- Warranty: 2 years on mechanical parts, 1 year on electrical parts, for faults not caused by misuse
Typical specifications
| Item | Value |
|---|---|
| Output | 60–80 pcs/min (standard model) |
| Pieces at a time | Six |
| Layout | Precision pallet conveyor |
| Machine size (L × W × H) | 3600 × 2500 × 1900 mm |
| Warranty | 2 years on mechanical parts, 1 year on electrical parts (faults not caused by misuse) |
Figures are for the standard model. Every machine is set up for your own tube and tip.
Suitable Parts
Medical tubes.
Frequently Asked Questions
How it is assembled: How Syringes and Needles Are Assembled by Machine
Request a Quote for This Machine
Send us your part drawing or photos. We check which machine can assemble it, then send you a quote.
